APPLIED OPERATIONS/Image Acquisition
OPERATION INSTRUCTIONS
2-96
Page
When <Free> is selected at [Mode] group box on [Acquire] panel, the
sampling speed cannot be changed.
6. Set the interval time or the number of scans.
The operating procedure is same as that in the XY observation mode. See section 2-
2-2, “XT Observation Mode” for details.
Up to 8000 times, images can be acquired. Set the number of scans in the
[N] text box in the [Time Series] sub-panel.
7. Click <XZ>, <XT>, or <XZT> etc. to acquire the image.
The image shown in the [Live] panel after image acquisition is the image
that acquired at the curved line specified on the image and arranged
uprightly in the X direction, from the top to bottom.
The image shown after image acquisition is the same a width as that in the
X direction specified in the [Live] panel. (Same as that in the XT
observation mode).
8. After image acquisition, select <Normal> under the [Surface XY] option button in the
[Mode] group box in the [Acquire] panel to return from the image acquisition mode.
TIP
TIP
NOTE
To Next Page
Loading...
