Olympus Fluoview FV1000 - Page 387

APPLIED OPERATIONS/Building an Image from a Different Viewpoint
OPERATION INSTRUCTIONS
2-303
Page
2. Select <Accept this view as new experiment> button on [Visualize] panel.
In case of Ver5.0, select <Make experiment from the X-Z view> button or
<Make experiment from the Y-Z view> button.
One Point!
This above illustration indicates Ver4.3a image.
In case of Ver5.0, 3D image based on XZ or YZ direction can be built.
<Accept this view as
new experiment>
button
TIP