Omicron CPC 100 Reference Manual

Introduction
2 - 37
Network
Figure 23:
Options tab Network
Via the built-in ePC, CPC 100 can be accessed from a stand-alone PC, for
example, a notebook and via a PC network. At the Network tab the
communication settings are specified.
In the combo box select between
Section ”CPC 100 in a Network” in chapter 11 explains in detail how to connect
CPC 100 to either a stand-alone PC or a PC network, and how to configure such
a connection.
Once the communication parameters are configured, press S
AVE OPTIONS to
save them to the Windows Registry.
For a change to come into effect, the operating system needs to be re-booted,
that is, CPC 100 restarted.
– DHCP/Auto IP Configures all communication parameters automatically;
the DHCP server will do it for you or it will be done via the
Auto IP mechanism.
The data entry fields for IP address, Subnet Mask, Default
Gateway and DNS are read-only, no data can be entered.
This is the recommended setting.
– Static IP Configure the communication parameters manually by
entering the values into the data entry fields using the soft-
touch keys.

Omicron CPC 100 Specifications

General

Brand	Omicron
Model	CPC 100
Category	Test Equipment
Language	English