CPC 100 V1.41
2 - 38
Display
Figure 24:
Options tab Display
The "sliding" regulator brightens or darkens the monitor display and the contrast
within it. Adding contrast increases the difference in shading between areas.
Date / Time
Figure 25:
Options tab Date/Time
Specify the system’s date and time here.
To set the time
– put the focus onto the “Time:” field using the handwheel
– use the U
P / DOWN keys to select between hours, minutes and seconds
– turn the handwheel to increase or decrease the value
– press the handwheel to acknowledge your entry
Changing the current date and time does not require pressing
S
AVE O PTIONS.