EasyManuals Logo

Oracle Exalogic Elastic Cloud User Manual

Default Icon
342 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #100 background imageLoading...
Page #100 background image
The Cisco Ethernet switch supplied with the Exalogic machine is minimally
configured during installation. The minimal configuration disables IP routing, and sets
the following:
• First management IP address, subnet mask, and gateway for NET0 (igb0 for
Oracle Solaris)
• First IP address, subnet mask, and gateway for ILOM
Additional configuration, such as defining multiple virtual local area networks
(VLANs) or enabling routing, may be required for the switch to operate properly in
your environment and is beyond the scope of the installation service. If additional
configuration is needed, then your network administrator must perform the necessary
configuration steps during installation of the Exalogic machine.
Table 6-6 is the management network configuration worksheet. Fill out this worksheet
and provide it to the Oracle representative, or use as a reference to complete the initial
configuration of your Exalogic machine. Information entered in this worksheet is used
as input to Oracle Exalogic Configuration Utility. This worksheet includes
fields in the Exalogic Configurator spreadsheet that typically require data.
Table 6-6 Management Network Configuration Worksheet
Item Entry Description and Example
First Management IP address
or
First ILOM IP address
First IP address in the
sequential range used for
management/network
interfaces. This network
must be distinct from all
other networks on the
Exalogic machine.
Example: 10.204.74.100
Subnet mask Subnet mask for the
management network.
Example: 255.255.248.0
Gateway IP address Gateway IP address for the
management network.
Example: 10.204.72.1
6.9.3 Client Access Network Configuration Worksheet (Required)
The client access network is used for client access to the Exalogic compute nodes.
Table 6-7 is the client access network configuration worksheet. Fill out this worksheet
and provide it to the Oracle representative, or use as a reference to complete the initial
configuration of your Exalogic machine. Information entered in this worksheet is used
as input to Oracle Exalogic Configuration Utility. This worksheet includes
fields in the Exalogic Configurator spreadsheet that typically require data.
Network Configuration Worksheets
6-18 Oracle Exalogic Elastic Cloud Machine Owner's Guide

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Oracle Exalogic Elastic Cloud and is the answer not in the manual?

Oracle Exalogic Elastic Cloud Specifications

General IconGeneral
BrandOracle
ModelExalogic Elastic Cloud
CategoryServer
LanguageEnglish

Related product manuals