• Use DNS domain as NFSv4 identity domain: Ensure that the option is not
selected.
• Use custom NFSv4 identity domain: Enter the domain name of the NIS service
you are using.
• Enable NFSv4 delegation: Select this option.
• Click APPLY.
9.3.2 Configure the NIS Service
Log in to the browser user interface (BUI) of the storage appliance, and configure the
NIS service. For example, in Figure 9-3 the domain nisdomain.example.com is
entered.
Figure 9-3 NIS Service
The NIS service must be up and running. For Server, select the Use listed servers
option, and enter the host name or IP address of the NIS server.
9.4 Configure an Exalogic Linux Compute Node to Use NFSv4
Configure an Exalogic Linux compute node as follows:
1.
Log in to the compute node as root.
2.
Edit the /etc/idmapd.conf configuration file:
vi /etc/idmapd.conf
Set the domain value, as in the following example:
Domain = us.myexample.com
Configure an Exalogic Linux Compute Node to Use NFSv4
9-4 Oracle Exalogic Elastic Cloud Machine Owner's Guide
To Next Page
Loading...
Need help?
General
