To Next PageTo Next PageTo Previous PageTo Previous Page
Need help?Do you have a question about the Oracle Exalogic Elastic Cloud and is the answer not in the manual?
Overview of Oracle Exalogic as an integrated hardware and software platform for various workloads.
Details on compute nodes, storage appliance, and networking components in an Exalogic machine.
Describes the physical arrangement of components within the Exalogic machine rack.
Explains procedures for powering on/off Exalogic machines and handling emergencies.
Specifies the environmental conditions necessary for Exalogic machine operation and installation.
Outlines the physical dimensions and clearance needed for Exalogic machine installation.
Details requirements for raised flooring, floor load, and electrical access considerations.
Covers voltage, current, PDU requirements, and circuit breaker specifications for Exalogic.
Specifies optimal and acceptable ranges for temperature and humidity for reliable operation.
Details airflow requirements, clearances, and floor tile configurations for proper cooling.
Provides a step-by-step overview of the Exalogic machine installation process.
Covers prerequisites, safety guidelines, unpacking, and tools needed for installation.
Step-by-step guide for initial system power-up and verification of component status.
Instructions for connecting a laptop for initial configuration and management tasks.
Guidance on proceeding after initial power-on and configuration steps.
Lists default ILOM, NET0, and InfiniBand IP addresses for a full rack configuration.
Lists default ILOM, NET0, and InfiniBand IP addresses for a half rack configuration.
Lists default ILOM, NET0, and InfiniBand IP addresses for a quarter rack configuration.
Lists default ILOM, NET0, and InfiniBand IP addresses for an eighth rack configuration.
Details default network ports used for SSH, HTTP, SNMP, IPMI, and ILOM remote console.
Describes the factory default network topology and interfaces for Exalogic.
Instructions on how to verify the default network configuration using a specific file.
Lists requirements for connecting Exalogic to the existing Ethernet network infrastructure.
Details the steps for configuring the Cisco Ethernet switch and other network components.
Describes network components, interfaces, and the purpose of Exalogic networks.
Explains how host names for network interfaces are generated for Exalogic systems.
Highlights key terms and technologies relevant to Oracle Solaris users in Exalogic.
Details network cable requirements and IP addressing schemes for Exalogic.
Information on default InfiniBand bonded IP addresses and how to reconfigure them.
Introduces key network concepts like InfiniBand fabric, switches, and bonded interfaces.
Introduces Oracle Integrated Lights Out Manager (ILOM) and its capabilities for managing Exalogic components.
Essential considerations before starting ILOM setup, including IP address requirements.
Visual representation of the management network and ILOM connectivity within Exalogic.
Details how ILOM IP addresses are assigned and can be reconfigured.
Instructions for accessing ILOM using network interfaces (CLI, Web GUI, KVM).
Procedures for accessing ILOM via a serial connection when network access is problematic.
Steps to reconfigure network access for ILOM via serial or Ethernet connections.
Guidance on post-ILOM configuration steps, including storage appliance setup.
Lists the necessary conditions and information required before configuring the storage appliance.
Initial steps to access and begin configuring the storage appliance via Ethernet.
Explains the concepts of projects and shares used for organizing storage on the appliance.
Outlines the stages involved in configuring the storage appliance for deployment.
Step-by-step guide to creating custom projects for managing shares and resources.
Instructions for creating custom shares (file systems and LUNs) for compute nodes.
Describes how to use the Phone Home service for fault reporting and system configuration.
Introduces NFSv4 and its advantages over NFSv3 for file locking and multihomed systems.
Steps to verify the Network Information Service (NIS) configuration on the storage appliance.
Details how to configure NFS and NIS services on the storage appliance for NFSv4.
Instructions for configuring Exalogic Linux compute nodes to utilize NFSv4.
Steps to create NFSv4 mount points on Oracle Linux compute nodes.
Explains Virtual NICs (VNICs) and their mapping to Exalogic network interfaces.
Comprehensive guide to setting up Ethernet over InfiniBand on Exalogic compute nodes using Oracle Linux.
Instructions for setting up Ethernet over InfiniBand on Exalogic compute nodes running Oracle Solaris.
Explains Virtual LANs (VLANs) and their benefits for network segmentation and traffic management.
Illustrates the use of VLANs for combining and isolating environments within Exalogic.
Describes how to assign VLAN identifiers to Ethernet connectors on gateway switches.
Steps for creating VNICs and associating them with VLANs on Exalogic compute nodes using Oracle Linux.
Procedures for creating VNICs and associating them with VLANs on Exalogic compute nodes using Oracle Solaris.
Covers physical specifications, CLI access, status verification, and link status checks for gateway switches.
Guidance on optional tasks such as creating VLANs and VNICs using InfiniBand gateway switches.
Provides an overview of administrative tasks and command sets for managing gateway switches.
Details the role of the Subnet Manager and its operation in different rack configurations.
Explains how to manage partitions within the Exalogic machine's InfiniBand fabric.
Lists the physical dimensions and weight of the Sun Datacenter InfiniBand Switch 36.
Instructions for accessing the command-line interface of the spine switch.
Procedures to check the operational status of the switch, including voltage and temperature.
Steps to manually start and activate the Subnet Manager on the spine switch.
Instructions to verify link status LEDs and troubleshoot cable connections.
Commands to verify the operational status of the InfiniBand fabric in multirack setups.
Steps to access the web interface for monitoring the spine switch and fabric.
Guidance on proceeding after setting up the Sun Datacenter InfiniBand Switch 36.
Covers identifying switches, HCAs, fabric topology, routes, and link status.
Procedures for clearing counters, resetting ports, and managing port speed and status.
Provides a URL for additional documentation on InfiniBand gateway switches.
Explains InfiniBand partitions for network isolation and security on Exalogic.
Details the concept of partition keys (pkey) and their assignment and membership types.
Lists prerequisites for creating unique InfiniBand partitions.
Guides on transitioning from default partitions to custom configurations for compute nodes.
Step-by-step instructions for creating a non-default IPoIB partition with specific pkey values.
Procedure for deleting a non-default InfiniBand partition.
Steps to create an EoIB partition and associate it with a VNIC and VLAN on the edge network.
Steps to create child interfaces and configure networks for IPoIB partitions on compute nodes.
Crucial notes for scenarios involving Exalogic connected to Exadata on the same InfiniBand fabric.
Discusses limitations related to partition configuration, such as pkey assignment and number of partitions.
Introduces Oracle Enterprise Manager Ops Center for monitoring Exalogic machine components.
Highlights key features of Ops Center for managing Exalogic hardware lifecycle and network views.
Lists requirements for using Oracle Enterprise Manager Ops Center, including installation and network setup.
Provides the URL to access official documentation for Oracle Enterprise Manager Ops Center.
Steps to launch and log in to the Oracle Enterprise Manager Ops Center interface.
Illustrates the workflow for managing Exalogic hardware components using Ops Center.
Instructions for managing user accounts and roles within Oracle Enterprise Manager Ops Center.
Steps to discover and manage Exalogic hardware assets through custom criteria.
Guide on organizing managed assets into groups and sub-groups based on physical hierarchy.
Procedures to view detailed hardware information about Exalogic compute nodes.
Steps to view detailed hardware and port information for InfiniBand switches.
Instructions to view storage appliance details, including hardware and configured shares.
How to view the InfiniBand fabric topology, nodes, and detailed information within Ops Center.
Explains the components and process of problem management within Ops Center.
Details on creating monitoring profiles and rules to detect and alert on component attributes.
Information on generating various reports for asset lifecycle insights, compliance, and system info.
How to use Oracle Services for viewing warranty, service requests, and filing new tickets.
Overview of Auto Service Request (ASR) as a feature for automated hardware fault reporting.
Recommended setup for installing the ASR Manager outside of Exalogic for telemetry reception.
Lists essential conditions and prerequisites before starting ASR installation.
Outlines system requirements like OS, Java version, and root access for ASR Manager installation.
Step-by-step guide for installing ASR Manager on a separate system.
Instructions for registering the ASR Manager with Oracle Support services.
Steps to activate ILOM for Exalogic compute nodes for ASR functionality.
Procedure to activate the storage appliance for Phone Home and ASR services.
Steps to approve and verify ASR activation status in My Oracle Support.
Provides an overview of the Exalogic Configuration Utility (ECU) for initial machine setup.
Key points to consider before using the ECU for Exalogic configuration.
Recommends performing configuration tasks with trained Oracle personnel or accredited partners.
Checklist to ensure all system component considerations are addressed for Exalogic installation.
Checklist to ensure data center room requirements, like space and layout, are met.
Checklist for verifying data center environmental factors like temperature and airflow.
Checklist to ensure access routes are clear and meet transportation requirements for equipment.
Checklist to confirm facility power requirements, voltage, and outlet availability are met.
Checklist for verifying power sources, UPS capacity, and frequency specifications.
Checklist to ensure safety requirements, including emergency power shut-off, are met.
Checklist to ensure proper handling of delivery, unpacking, and staging of equipment.
Checklist to ensure network specification requirements, including IP addresses and cabling, are met.
Checklist for considerations and requirements related to reracking Exalogic machines.
Illustrates the cabling for a single Exalogic eighth rack configuration.
Shows the cabling for a single Exalogic quarter rack configuration.
Depicts the cabling for a single Exalogic half rack configuration.
Illustrates the cabling for a single Exalogic full rack configuration.
Lists field-replaceable units (FRUs) for Exalogic X5-2 machines.
Lists field-replaceable units (FRUs) for Exalogic X4-2 machines.
Lists field-replaceable units (FRUs) for Exalogic X2-2 and X3-2 machines.
Lists replaceable parts for the ZS3-ES storage appliance in Exalogic X5-2.
Lists replaceable parts for the ZS3-ES storage appliance in Exalogic X4-2.
Lists replaceable parts for the Sun ZFS Storage 7320 appliance in Exalogic.
Lists replaceable parts for Oracle Server X5-2 compute nodes in Exalogic.
Lists replaceable parts for Sun Server X4-2 compute nodes in Exalogic.
Lists replaceable parts for Sun Server X3-2 compute nodes in Exalogic.
Lists replaceable parts for X4170 M2 compute nodes in Exalogic.
Lists replaceable parts for Sun Network QDR InfiniBand Gateway Switches in Exalogic X5-2.
Lists replaceable parts for Sun Network QDR InfiniBand Gateway Switches in Exalogic X4-2.
Lists replaceable parts for Sun Network QDR InfiniBand Gateway Switches in Exalogic X2-2 and X3-2.
Lists replaceable parts for Sun Datacenter InfiniBand Switch 36 in Exalogic X5-2.
Lists replaceable parts for Sun Datacenter InfiniBand Switch 36 in Exalogic X4-2.
Lists replaceable parts for Sun Datacenter InfiniBand Switch 36 in Exalogic X2-2 and X3-2.
Lists replacement parts for the Cisco Catalyst 4948E-F-S switch.
Lists replacement parts for the Cisco Catalyst 4948 switch.
Lists replacement parts for the Gari DE2-24C Disk Enclosure for Exalogic X5-2.
Lists replacement parts for the Gari DE2-24C Disk Enclosure.
Provides tables detailing Gigabit Ethernet cable connections for Exalogic machine configurations.
Presents tables detailing InfiniBand cable connections for Exalogic machine configurations.
Contains tables detailing power cabling connections for Exalogic machine configurations.
Lists the requirements for creating Solaris zones on an Exalogic machine.
Defines key terms used in managing Solaris zones, such as Logical Unit and Initiator.
Step-by-step instructions for creating a Solaris zone, including iSCSI setup and LUN formatting.
Procedure for migrating a Solaris zone from one physical host to another.
Lists the essential RPM packages that should not be modified or deleted outside of updates.
Steps to set up a local yum repository and configure compute nodes as yum clients.
Instructions on using yum to install, update, or remove RPM packages on compute nodes.
General
