Note:
After you cable your laptop to the Cisco Ethernet switch, you can use the
NET0 IP addresses of Exalogic machine components to communicate with
them. For a list of default IP addresses assigned at the time of manufacturing,
see Default IP Addresses and Ports.
If you have not run the Oracle Exalogic Configuration Utility set of
tools and scripts to reconfigure IP addresses for the Exalogic machine, you can
use a set of default IP addresses. If you have already run the Oracle Exalogic
Configuration Utility set of tools and scripts, you can use the network
IP address that you provided as input to the Exalogic Configurator spreadsheet.
For more information about Oracle Exalogic Configuration Utility,
see Configure the Exalogic Machine Using ECU.
3.5 What Next?
After powering on the Exalogic machine, including compute nodes and storage
appliance, proceed to configure the Exalogic machine.
Note:
For information about changing passwords of Exalogic machine components,
see MOS document 1594316.1 at:
https://support.oracle.com/epmos/faces/DocumentDisplay?
id=1594316.1
What Next?
3-20 Oracle Exalogic Elastic Cloud Machine Owner's Guide
To Next Page
Loading...
Need help?
General
