Figure 17-11 Launching Service Processor Console
8. On the right navigation pane named Actions, click the Launch LOM Controller
option to verify that the Sun Integrated Lights Out Manager (ILOM) web interface
for the compute node can be launched.
17.11 Viewing InfiniBand Switches
To view Exalogic-specific InfiniBand switches, do the following:
1. On the left navigation pane, under Assets, from the drop-down list, select the All
User Defined Groups option.
2. Select the Exalogic top-level group. The Exalogic group page is displayed, as in
Figure 17-9.
3.
On the left navigation pane, select a particular switch under the IBswitches
sub-group to view information about that switch. You should see a page similar to
the compute node page shown in Figure 17-12.
Viewing InfiniBand Switches
Monitoring the Exalogic Machine Using Oracle Enterprise Manager Ops Center 17-19
To Next Page
Loading...
Need help?
General
