Figure 3-12 Exalogic Compute Node LED Lights
6.
Verify that the main power is on for each compute node.
In main power mode, the Power/OK LED on the front panel blinks in a one second
on, one second off pattern while the system BIOS starts. After BIOS initialization
completes and the operating system begins to start, the Power/OK LED illuminates
and remains a steady green.
7.
Press the soft switches located on the front of the two storage heads in the storage
appliance, as shown in Figure 3-13. In addition, see Figure 3-14.
Figure 3-13 Soft Switches on the Server Heads in the Sun ZFS Storage 7320
appliance
Figure 3-14 shows the soft switch and LED lights on each of the server heads in the
storage appliance.
Power on the System the First Time
3-16 Oracle Exalogic Elastic Cloud Machine Owner's Guide
To Next Page
Loading...
