Oracle Exalogic Elastic Cloud - Install SASM Package; Install ASR Package

1. If necessary, download Sun Service Tags 1.1.5 from the following URL, and unzip:
https://support.oracle.com/CSP/main/article?
cmd=show&type=NOT&doctype=SYSTEMDOC&id=1185493.1
2. Run the following commands to install the service tags:
rpm -i sun-servicetag-1.1.5-1.i386.rpm
rpm -i sun-hardware-reg-1.0.0-1.i386.rpm
18.5.2 Install SASM Package
To install the SASM package, complete the following steps:
1.
Run the following command, as a root user, to verify you have version 1.2.1 or
later:
• On Oracle Linux:
# rpm -q SUNWsasm
• On Oracle Solaris:
# pkginfo -l SUNWsasm
If required, download SASM 1.2.1 from the following URL:
https://support.oracle.com/CSP/main/article?
cmd=show&type=NOT&doctype=SYSTEMDOC&id=1185493.1
2.
As root, run the following command to install the SASM package:
• On Oracle Linux:
# rpm -i SUNWsasm.version_num.rpm
• On Oracle Solaris:
# pkgadd -d SUNWsasm.version_num.pkg
18.5.3 Install ASR Package
To install the ASR package, complete the following steps:
1.
Download the ASR package from the following URL, and unzip:
https://support.oracle.com/CSP/main/article?
cmd=show&type=NOT&doctype=SYSTEMDOC&id=1185493.1
2.
As root, run the following commands to install the ASR package:
• On Oracle Linux:
# rpm -i SUNWswasr.version_num.rpm
• On Oracle Solaris:
# pkgadd -d SUNWswasr.version_num.pkg
3.
Add the asr command to the PATH (update to the
root's .profile, .cshrc, .kshrc. or .bashrc as needed):
PATH=$PATH:/opt/SUNWswasr/bin/asr export PATH
Install ASR Manager on a Standalone System
Install the ASR Software 18-3