using default guid 0x21283a8620b0f0
Aug 13 19:44:53 612312 [B7D466C0] 0x02 -> osm_vendor_bind: Binding to
port0x21283a8620b0f0
Aug 13 19:44:53 636876 [B7D466C0] 0x02 -> osmtest_validate_sa_class_port_info:
-----------------------------
SA Class Port Info:
base_ver:1
class_ver:2
cap_mask:0x2602
cap_mask2:0x0
resp_time_val:0x10
-----------------------------
OSMTEST: TEST "Create Inventory" PASS
#
3.
After an event, compare the present topology to that saved in the inventory file, as
in the following example:
# osmtest -f v
Command Line Arguments
Done with args
Flow = Validate Inventory
Aug 13 19:45:02 342143 [B7EF96C0] 0x7f -> Setting log level to: 0x03
Aug 13 19:45:02 342857 [B7EF96C0] 0x02 -> osm_vendor_init: 1000 pending
umadsspecified
using default guid 0x21283a8620b0f0
Aug 13 19:45:02 351555 [B7EF96C0] 0x02 -> osm_vendor_bind: Binding to
port0x21283a8620b0f0
Aug 13 19:45:02 375997 [B7EF96C0] 0x02 -> osmtest_validate_sa_class_port_info:
-----------------------------
SA Class Port Info:
base_ver:1
class_ver:2
cap_mask:0x2602
cap_mask2:0x0
resp_time_val:0x10
-----------------------------
Aug 13 19:45:02 378991 [B7EF96C0] 0x01 -> osmtest_validate_node_data:
Checkingnode 0x0021283a8620b0a0, LID 0x14
Aug 13 19:45:02 379172 [B7EF96C0] 0x01 -> osmtest_validate_node_data:
Checkingnode 0x0021283a8620b0b0, LID 0x15
.
.
.
Aug 13 19:45:02 480201 [B7EF96C0] 0x01 -
>osmtest_validate_single_path_rec_guid_pair:
Checking src 0x0021283a8620b0f0 to dest 0x0021283a8620b0f0
Aug 13 19:45:02 480588 [B7EF96C0] 0x01 -> osmtest_validate_path_data:
Checkingpath SLID 0x19 to DLID 0x19
Aug 13 19:45:02 480989 [B7EF96C0] 0x02 -> osmtest_run:
***************** ALL TESTS PASS *****************
OSMTEST: TEST "Validate Inventory" PASS
#
Note:
Depending on the size of your InfiniBand fabric, the output from the osmtest
command could be tens of thousands of lines long.
Monitor the InfiniBand Fabric
Monitor and Control the InfiniBand Fabric 15-9
To Next Page
Loading...
Need help?
General
