zonecfg:zone04> add net
zonecfg:zone04:net> set physical=vnic2_name
zonecfg:zone04:net> end
zonecfg:zone04> verify
zonecfg:zone04> commit
In this example:
• IPoIB_address_of_the_storage_appliance is the IP address of the
storage appliance on the IPoIB network.
• LUNGUID is the GUID of the LUN you created in Create the Project and LUN.
• vnic1_name and vnic2_name are the VNICs you created in Set Up the
Exclusive 10 GbE Network for the Zone.
Example:
zonecfg:zone04> set zonepath=/zones/zone04
zonecfg:zone04> add rootzpool
zonecfg:zone04:rootzpool> add storage iscsi://192.168.14.133/luname.naa.
600144f09c96cca900005190bfc4000a
zonecfg:zone04:rootzpool> end
zonecfg:zone04> remove anet
zonecfg:zone04> add net
zonecfg:zone04:net> set physical=vnic2_1706
zonecfg:zone04:net> end
zonecfg:zone04> add net
zonecfg:zone04:net> set physical=vnic3_1706
zonecfg:zone04:net> end
zonecfg:zone04> verify
zonecfg:zone04> commit
5. You can verify the details of the zone by running the info command as follows:
zonecfg:zone04> info
zonename: zone04
zonepath: /zones/zone04
brand: solaris
autoboot: false
bootargs:
file-mac-profile:
pool:
limitpriv:
scheduling-class:
ip-type: exclusive
hostid:
fs-allowed:
net:
address not specified
allowed-address not specified
configure-allowed-address: true
physical: vnic1_name
defrouter not specified
net:
address not specified
allowed-address not specified
configure-allowed-address: true
physical: vnic2_name
defrouter not specified
rootzpool:
Create a Solaris Zone
Manage Solaris Zones on Exalogic F-9
To Next Page
Loading...
Need help?
General
