Panasonic fp2/fp2sh - Page 293

11-25
FP2/FP2SH/FP10SH
Address
Name
Description
R9070
MEWNET-W/-P
PC link
operation
mode relay
[for PC link 0
(W/P)]
Unit
No.1
Turns on when unit No. 1 is in the RUN mode.
Turns off when unit No. 1 is in the PROG. mode.
R9071
Unit
No.2
Turns on when unit No. 2 is in the RUN mode.
Turns off when unit No. 2 is in the PROG. mode.
R9072
Unit
No.3
Turns on when unit No. 3 is in the RUN mode.
Turns off when unit No. 3 is in the PROG. mode.
R9073
Unit
No.4
Turns on when unit No. 4 is in the RUN mode.
Turns off when unit No. 4 is in the PROG. mode.
R9074
Unit
No.5
Turns on when unit No. 5 is in the RUN mode.
Turns off when unit No. 5 is in the PROG. mode.
R9075
Unit
No.6
Turns on when unit No. 6 is in the RUN mode.
Turns off when unit No. 6 is in the PROG. mode.
R9076
Unit
No.7
Turns on when unit No. 7 is in the RUN mode.
Turns off when unit No. 7 is in the PROG. mode.
R9077
Unit
No.8
Turns on when unit No. 8 is in the RUN mode.
Turns off when unit No. 8 is in the PROG. mode.
R9078
Unit
No.9
Turns on when unit No. 9 is in the RUN mode.
Turns off when unit No. 9 is in the PROG. mode.
R9079
Unit
No.10
Turns on when unit No. 10 is in the RUN mode.
Turns off when unit No. 10 is in the PROG. mode.
R907A
Unit
No.11
Turns on when unit No. 11 is in the RUN mode.
Turns off when unit No. 11 is in the PROG. mode.
R907B
Unit
No.12
Turns on when unit No. 12 is in the RUN mode.
Turns off when unit No. 12 is in the PROG. mode.
R907C
Unit
No.13
Turns on when unit No. 13 is in the RUN mode.
Turns off when unit No. 13 is in the PROG. mode.
R907D
Unit
No.14
Turns on when unit No. 14 is in the RUN mode.
Turns off when unit No. 14 is in the PROG. mode.
R907E
Unit
No.15
Turns on when unit No. 15 is in the RUN mode.
Turns off when unit No. 15 is in the PROG. mode.
R907F
Unit
No.16
Turns on when unit No. 16 is in the RUN mode.
Turns off when unit No. 16 is in the PROG. mode.
Note) When the system registers 46=K0, PC link 0 for the link unit with a smaller slot No. and PC link 1
for one with a larger slot No.
When the system registers 46=K1, PC link 1 for the link unit with a smaller slot No. and PC link 0
for one with a larger slot No.