Panasonic fp2/fp2sh User Manual

11-26
FP2/FP2SH/FP10SH
Address
Name
Description
R9080
MEWNET-W/-P
PC link
transmission
assurance
relay
[for PC link 1
(W/P)] (*Note)
Unit
No.1
Turns on when unit No. 1 is communicating properly in the PC
link mode. Turns off when operation is stopped, when an error
occurs, or when not in the PC link mode.
R9081
Unit
No.2
Turns on when unit No. 2 is communicating properly in the PC
link mode. Turns off when operation is stopped, when an error
occurs, or when not in the PC link mode.
R9082
Unit
No.3
Turns on when unit No. 3 is communicating properly in the PC
link mode. Turns off when operation is stopped, when an error
occurs, or when not in the PC link mode.
R9083
Unit
No.4
Turns on when unit No. 4 is communicating properly in the PC
link mode. Turns off when operation is stopped, when an error
occurs, or when not in the PC link mode.
R9084
Unit
No.5
Turns on when unit No. 5 is communicating properly in the PC
link mode. Turns off when operation is stopped, when an error
occurs, or when not in the PC link mode.
R9085
Unit
No.6
Turns on when unit No. 6 is communicating properly in the PC
link mode. Turns off when operation is stopped, when an error
occurs, or when not in the PC link mode.
R9086
Unit
No.7
Turns on when unit No. 7 is communicating properly in the PC
link mode. Turns off when operation is stopped, when an error
occurs, or when not in the PC link mode.
R9087
Unit
No.8
Turns on when unit No. 8 is communicating properly in the PC
link mode. Turns off when operation is stopped, when an error
occurs, or when not in the PC link mode.
R9088
Unit
No.9
Turns on when unit No. 9 is communicating properly in the PC
link mode. Turns off when operation is stopped, when an error
occurs, or when not in the PC link mode.
R9089
Unit
No.10
Turns on when unit No. 10 is communicating properly in the
PC link mode. Turns off when operation is stopped, when an
error occurs, or when not in the PC link mode.
R908A
Unit
No.11
Turns on when unit No. 11 is communicating properly in the
PC link mode. Turns off when operation is stopped, when an
error occurs, or when not in the PC link mode.
R908B
Unit
No.12
Turns on when unit No. 12 is communicating properly in the
PC link mode. Turns off when operation is stopped, when an
error occurs, or when not in the PC link mode.
R908C
Unit
No.13
Turns on when unit No. 13 is communicating properly in the
PC link mode. Turns off when operation is stopped, when an
error occurs, or when not in the PC link mode.
R908D
Unit
No.14
Turns on when unit No. 14 is communicating properly in the
PC link mode. Turns off when operation is stopped, when an
error occurs, or when not in the PC link mode.
R908E
Unit
No.15
Turns on when unit No. 15 is communicating properly in the
PC link mode. Turns off when operation is stopped, when an
error occurs, or when not in the PC link mode.
R908F
Unit
No.16
Turns on when unit No. 16 is communicating properly in the
PC link mode. Turns off when operation is stopped, when an
error occurs, or when not in the PC link mode.
Note) When the system registers 46=K0, PC link 0 for the link unit with a smaller slot No. and PC link 1
for one with a larger slot No.
When the system registers 46=K1, PC link 1 for the link unit with a smaller slot No. and PC link 0
for one with a larger slot No.

Panasonic fp2/fp2sh Specifications

General

Brand	Panasonic
Model	fp2/fp2sh
Category	Controller
Language	English