5.21
BODY / STEERING / SUSPENSION
5
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
Rear Bumper
1. Remove the (4) Torx screws retaining the upper
portion of the rear bumper to the cargo box.
2. Remove the (4) Torx screws retaining the lower
p
ortion of the rear bumper to the frame.
3. Remove the (2) fasteners retaining the middle portion
o
f the rear bumper to the cargo box.
Hood and Front Body Work
Hood Removal
1. To remove the hood, turn b
oth latches to disengage
the rear portion of the hood.
2. Tilt the hood back to disengage the front tabs and
r
emove the hood from the vehicle.
Front Body / Dash Removal
1. Remove the hood as previously described.
2. Remove the front bumper (see “BODY COMPONENT
REMOVAL - Fr
ont Bumper”).
3. Remove the front portion of the cab frame assembly
to
allow dash removal. Refer to appropriate “CAB
FRAME - Assembly / Removal” procedure for
assembly torque specifications.
4. Remove the push rivets that attach the dash assembly
to
the rocker panels on each side.
5. Remove the (2) Torx screws and (2) push rivets that
r
etain the front and rear of the dash assembly.
To Next Page
Loading...
Need help?
General
