Polaris 2013 RANGER RZR S User Manual

2.27
MAINTENANCE
2
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
Radiator
1. Check radiator (A) air passages for restrictions or
damage.
2. Carefully straighten any bent radiator fins.
3. Remove any obstructions with compressed air or low
pr
essure water.
Coolant Drain
1. Remove the hood from the front cab.
2. Slowly remove the pressure cap to relieve any cooling
syst
em pressure.
3. Place a suitable drain pan underneath the radiator
fitting on
the front RH side of the vehicle.
4. Drain the coolant from the radiator by removing the
l
ower coolant hose from the radiator as shown.
Properly dispose of the coolant.
5. Allow coolant to completely drain.
CAUTION
Washing the vehicle with a high-pressure
washer could damage the radiator fins and
impair the radiators effectiveness. Use of a high-
pressure washer is not recommended.
A
Flush radiator fins
in this direction
WARNING
Never drain the coolant when the engine and
radiator are warm or hot. Hot coolant can cause
severe burns. Allow engine and radiator to cool.
Drain Here
PRELIMINARY VERSION

Polaris 2013 RANGER RZR S Specifications

General

Brand	Polaris
Model	2013 RANGER RZR S
Category	Offroad Vehicle
Language	English