To Next Page

To Previous Page

5.22

BODY / STEERING / SUSPENSION

9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual

6. Disconnect all electrical dash components noting their

location and wire routing.

7. Remove the dash assembly from the vehicle.

Front Fender Flair Removal

1. If dash is installed, remove the (2) push rivets that

ttach the lower portion of the fender flair to the

rocker panels.

2. Remove the (6) push rivets (RZR) or (8) T27 Torx

scre

ws (RZR-S/RZR-4) and remove fender flairs from

the dash assembly.

Rear Fender, Flair and Tie Down Removal

1. Remove the rear bumper (see “BODY COMPONENT

REMOVAL - Rear Bumper”).

2. Remove the push rivets that retain the rear portion of

e rocker panels to the rear fenders.

3. Remove the (3) push rivets (RZR) or (8) T27 Torx

crews (RZR-S / RZR-4) and remove the fender flair.

4. Remove the (3) Torx screws from the bottom side of

e fender and the upper push rivet from the top side.

Remove the fender from the vehicle.

5. Remove the (4) fasteners that retain the tie-down

bra

ckets to the cargo box and remove from vehicle.

Remove

Standard RZR Shown

Fender

Flair

Tie-Down

Push

Rivets

Torx

Screws

Push

Rivet

Standard RZR

Shown

PRELIMINARY VERSION

Polaris 2013 RANGER RZR S User Manual

Questions and Answers: