Polaris 2013 RANGER RZR S User Manual

2.37
MAINTENANCE
2
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
Shock Compression Adjustment
The compression damping adjustment is located on top of
the shock ‘Piggyback’ reservoir of each shock.
Turn the clicker adjuster knob to make damping
ad
justments.
NOTE: When the clicker adjuster is turned
c
lockwise until it stops, the damping is in the fully
closed position.
Turn the clicker clockwise to increase c
ompression
damping. Turn the clicker counter-clockwise to decrease
compression damping.
NOTE: The factory setting is 10 clicks from closed.
Ref
er to the “Compression Adjustment Table”
below.
Compression Adjustment Table
Setting Compression Damping
Softest Full counter-clockwise position
Factory 10 clicks from closed
Firmest 2 clicks from closed
Clicker
Adjuster
RZR 4 L.E.
Increase
Damping
Decrease
Damping
Shown
PRELIMINARY VERSION

Polaris 2013 RANGER RZR S Specifications

General

Brand	Polaris
Model	2013 RANGER RZR S
Category	Offroad Vehicle
Language	English