Polaris 2013 RANGER RZR S - Gearcase Assembly

7.40
FINAL DRIVE
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
Gearcase Assembly
1. Install a new input shaft seal using a standard seal
installer or other suitable method.
2. Install new seals on each side o
f gearcase housing
using a standard seal installer. Apply a thin coat of
case sealant (2871557) to gearcase mating surfaces
upon cover installation.
3. If removed, install each axle spool bearing race using
stan
dard bearing installation tools and an arbor press.
WARNING
Wear the appropriate safety equipment while
installing bearing races to
reduce the risk of injury.
PRELIMINARY VERSION