7.39
FINAL DRIVE
7
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
5. Inspect the ring gear for chipped, worn, or broken
teeth. If damaged, replace the gearcase assembly.
NOTE: In the event damage to the gears or housing
requires replacement, the
entire assembly must be
replaced.
6. Remove the seals from each sid
e of the gearcase
housing.
7. Remove the input shaft seal using a seal puller or
o
ther suitable method.
8. Inspect the input shaft by rota
ting the assembly in the
gearcase housing while checking for any looseness or
roughness. Inspect the pinion gear teeth for chipped,
worn, or broken teeth. If damaged, replace the ring
gear and pinion gear as a set.
NOTE: In the event damage to the gears, pinion
bear
ings or housing requires replacement, the entire
assembly must be replaced.
To Next Page
Loading...
