6.34
CLUTCHING
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
Troubleshooting, Continued.....
Situation Probable Cause Remedy
PVT cover
over
heating
(melting)
-Plugged air intake or outlet.
-Belt slippage due to water, oil, grease, etc.,
ru
bbing on cover.
-Clutches or weight being applied to cover
w
hile in operation.
-High vs. low range.
-Clear obstruction
-Inspect system. Clean, re
pair or replace as
necessary. Seal PVT system ducts.
-Remove weight. Inform operator.
-Instruct operator on guidelines for operation in
pr
oper driving range for different terrain as outlined
in Owner’s Safety and Maintenance Manual.
Water ingestion
-Cover seals or ducts leaking
-Operator error
-Find leak and repair as necessary.
-Instruct operator on guidelines for operation in wet
te
rrain as outlined in Owner’s Safety and
Maintenance Manual.
Belt slippage
-Belt worn out
-Water ingestion
-Belt contaminated with oil or grease
-Replace belt.
-Inspect and seal PVT system.
-Inspect and clean.
PVT noise
-Belt worn or separated, thin spots, loose belt
-Broken or worn clutch components, cover
hitting clutches
-Replace belt.
-Inspect and repair as necessary.
Engagement
erratic or stabby
-Thin spots on belt, worn belt
-Drive clutch bushings stick
-Replace belt. Refer to belt burnt troubleshooting
and
instruct operator.
-Inspect and repair clutches.
To Next Page
Loading...
