Polaris 2015 RZR 900 - Valve Cover Installation

3.86
9925723 R01 - 2015 RZR 900 Service Manual
© Copyright 2014 Polaris Industries Inc.
Valve Cover Installation
1. Apply anti-seize compound to spark plug threads.
2. Install spark plugs
4
and torque to specification.
Spark Plugs:
7 ft-lbs (10 Nm)
3. Prepare valve cover sealing surfaces by cleaning
thoroughly to remove all residue.
4. Inspect the valve cover seal
3
and replace if
necessary.
5. Replace the isolators
2
around each T40 bolt.
6. Install the four valve cover shoulder bolts
1
and
isolators using a T40 driver.
7. Torque valve cover bolts to specification.
Valve Cover Bolts:
7 ft-lbs (10 Nm)
ENGINE / COOLING SYSTEM