Polaris 2015 RZR 900 - Front Stabilizer Bar Replacement (50

8
8.19
9925723 R01 - 2015 RZR 900 Service Manual
© Copyright 2014 Polaris Industries Inc.
Front Stabilizer Bar Replacement (50" & XC)
1. Remove the nut
1
retaining the front stabilizer bar
link
2
to the upper control arm
3
on both sides.
2. Remove the Fasteners retaining the stabilizer bar
mount to the frame.
3. Remove the stabilizer bar out the side of the vehicle.
4. Remove the fasteners
4
retaining the stabilizer bar
link to the stabilizer bar.
5. To install, reverse procedure and torque fasteners to
specification
Stabilizer Bar Link Fasteners:
40 ft-lb (54 Nm)
Stabilizer Bar Mount Fasteners:
17 ft-lb (23 Nm)
STEERING / SUSPENSION