Polaris 2015 RZR 900 Service Manual

7.8
9925723 R01 - 2015 RZR 900 Service Manual
© Copyright 2014 Polaris Industries Inc.
Rear Bearing Carrier Installation
1. Install drive shaft through the back side of the bearing
carrier.
2. Install the fasteners
1
that attach the upper and lower
control arms to the bearing carrier. Torque bolts to
specification.
Rear Bearing Carrier Mounting Fasteners:
42 ft-lb (57 Nm)
3. Apply a small amount of anti-seize to the drive shaft
splines.
4. Install rear wheel hub assembly
2
, cone washers
3
and hand tighten the castle nut. Install washers
domed side out.
5. Install the rear brake caliper assembly and new bolts
4
. Torque bolts to specification.
Brake Caliper Mounting Bolts:
46 ft-lb (62 Nm)
FINAL DRIVE

Polaris 2015 RZR 900 Specifications

General

Brand	Polaris
Model	2015 RZR 900
Category	Utility Vehicle
Language	English