3.28
9925723 R01 - 2015 RZR 900 Service Manual
© Copyright 2014 Polaris Industries Inc.
CAUTION
Correct Drive Clutch Puller P/N 2872085
Using the incorrect puller may result in a damaged
crankshaft.
23.Remove seven bolts retaining the inner clutch cover.
24.Remove the positive and negative cables going to the
starter.
25.Put a thin block of wood under the engine assembly
to assist with engine mounting fastener removal.
26.Remove the six engine-to-transmission mounting
bolts.
27.Remove the four bolts retaining the engine to the
front engine mount.
28.Remove the engine from the frame.
Engine Installation
1. Carefully install the engine in the frame.
2. Install the four bolts retaining the engine to the front
engine mount. Torque bolts to specification.
Engine Mounting Bolts (front)
40 ft-lbs (54 Nm)
3. Install the Clutch Center Distance tool (PU-50658)
onto the crankshaft and transmission input shaft to
properly position the clutch center distance.
ENGINE / COOLING SYSTEM
To Next Page
Loading...
Need help?
General
