3
3.29
9925723 R01 - 2015 RZR 900 Service Manual
© Copyright 2014 Polaris Industries Inc.
4. Install the six engine-to-transmission mounting bolts.
Torque bolts in sequence to specification.
Engine-to-Transmission Mounting Bolts
Step 1-2: 64 ft-lb (87 Nm)
Step 3: 5 ft-lb (7 Nm)
Step 4-7: 44 ft-lb (60 Nm)
5. Remove the thin block of wood under the engine
assembly if you placed on there for engine removal.
6. Install the positive and negative cables going to the
starter. Torque fasteners to specification.
Starter Cable Fasteners
30 in-lb (4 Nm)
7. Install the seven bolts retaining the inner clutch cover.
Torque bolts to specification.
Inner Clutch Cover Fasteners
10 ft-lb (14 Nm)
8. Install the drive clutch on the vehicle. Torque
mounting bolt to specification.
Drive Clutch Bolt
96 ft-lb (130 Nm)
9. Install the driven clutch and the belt. Torque bolt to
specification.
Driven Clutch Bolt
38 ft-lb (52 Nm)
10.Install the PVT outer cover screws. Torque screws to
specification.
Inner Clutch Cover Fasteners
54 in-lb (5 Nm)
ENGINE / COOLING SYSTEM
To Next Page
Loading...
Need help?
General
