Polaris 2015 RZR 900 Service Manual

9.26
9925723 R01 - 2015 RZR 900 Service Manual
© Copyright 2014 Polaris Industries Inc.
Rear Brake Pad Inspection
1. Clean the caliper with brake cleaner or alcohol.
2. Measure the thickness of the pad material. Replace
pads if worn beyond the service limit.
Rear Brake Pad Thickness:
0.298 ± 0.007″ (7.57 mm ± .178 mm)
Service Limit: 0.180″ (4.6 mm)
Rear Caliper / Pad Installation
1. Lubricate mounting bracket pins
1
with a light film of
silicone grease and install rubber dust boots
2
.
2. Compress mounting bracket and make sure dust
boots are fully seated. Install pads with friction
material facing each other.
CAUTION
If brake pads are contaminated with grease, oil, or
liquid soaked do not use the pads. Use only new clean
pads.
3. Install the caliper and torque the new mounting bolts
3
to specification.
Rear Caliper Mount Bolt :
46 ft-lb (62 Nm)
BRAKE SYSTEM

Polaris 2015 RZR 900 Specifications

General

Brand	Polaris
Model	2015 RZR 900
Category	Utility Vehicle
Language	English