Polaris 2015 RZR 900 Service Manual

2.14
9925723 R01 - 2015 RZR 900 Service Manual
© Copyright 2014 Polaris Industries Inc.
Engine Oil Level
The RZR 900 engine has a wet-sump design, meaning
the engine oil is contained in the bottom of the
crankcase. To check the oil level, follow the procedure
listed below:
Access the oil dipstick through the opening in front of the
passenger rear tire.
Access the oil fill cap through the cargo box access
panel.
Polaris recommends the use of PS-4 Synthetic or PS-4
Extreme Duty Synthetic 4-Cycle Engine Oil.
Recommended Engine Oil:
PS-4 (PN 2876244)
Ambient Temp Range: -35° F to 100° F
PS-4 Extreme Duty (PN 2878920)
Ambient Temp Range: 0° F to 120° F
Capacity: 2.5 Quarts (2.4 L)
1. Position vehicle on a level surface and place the
transmission in PARK.
2. Stop the engine and allow it to cool down before
removing the dipstick.
3. Remove the access panel between the seats to
access the dipstick.
4. Unlock the dipstick lever
1
. Remove the dipstick and
wipe it dry with a clean cloth.
5. Reinstall the dipstick and push it into place. Do not
lock the dipstick.
NOTE: Make certain the dipstick is inserted all
the way into the dipstick tube to keep the depth of
the dipstick consistent.
6. Remove the dipstick and check the oil level.
7. Add the recommended oil as necessary to bring the
oil level within the SAFE range on dipstick. Do not
overfill (see NOTE below).
NOTE: A rising oil level between checks during
cold weather operation can indicate
contaminants such as gas or moisture collecting
in the crankcase. If the oil level is over the upper
mark, change the oil immediately.
8. Add engine oil through the oil fill cap
2
located on top
of the valve cover, under the cargo box access panel.
9. When finished, reinstall dipstick and lock the lever.
MAINTENANCE

Polaris 2015 RZR 900 Specifications

General

Brand	Polaris
Model	2015 RZR 900
Category	Utility Vehicle
Language	English