7
7.9
9925723 R01 - 2015 RZR 900 Service Manual
© Copyright 2014 Polaris Industries Inc.
6. Torque wheel hub nut to specification and install a
new cotter pin
. Tighten nut slightly if necessary to
align cotter pin slot.
Hub Castle Nut:
110 ft-lbs (149 Nm)
7. Install wheel and four wheel nuts finger tight. Lower
vehicle and torque wheel nuts to specification.
Wheel Lug Nuts:
Aluminum: 120 ft-lbs (163 Nm)
Steel: 60 ft-lb (81 Nm)
8. Rotate wheel and check for smooth operation. Bend
both ends of the cotter pin around the end of the
spindle.
FINAL DRIVE
To Next Page
Loading...
Need help?
General
