Polaris 2015 RZR 900 Service Manual

6.12
9925723 R01 - 2015 RZR 900 Service Manual
© Copyright 2014 Polaris Industries Inc.
10.Torque left side mounting bolts to specification in
sequence.
11. Torque right side mounting bolts to specification using
the numbered sequence shown.
Engine / Transmission Mounting Bolts:
Step 1-2: 64 ft-lb (87 Nm)
Step 3: 5 ft-lb (7 Nm)
Step 4-7: 44 ft-lb (60 Nm)
12.Remove the clutch center distance tool.
13.Remove the spacer or support between the vehicle
frame and engine.
14.Install and properly route the gear position switch
connector
4
, speed sensor connector
5
, crankshaft
position sensor connector
6
, shift bracket and shift
bracket bolts
7
, shift cable clevis pin and washer
8
onto the transmission.
15.Torque the two shift cable bracket bolts to
specification.
Shift Cable Bracket Bolts:
17 ft-lb (23 Nm)
16.Install three wire ties to retain wire harness to
transmission and mounts.
TRANSMISSION

Polaris 2015 RZR 900 Specifications

General

Brand	Polaris
Model	2015 RZR 900
Category	Utility Vehicle
Language	English