8
8.29
9925723 R01 - 2015 RZR 900 Service Manual
© Copyright 2014 Polaris Industries Inc.
13.Remove the IFP and dump out remaining oil.
14.LSC equipped shocks will require the cap to be
removed with a torx bit driver.
15.Remove the LSC using a 5/8” wrench.
16.Remove the DSC using a DSC removal socket.
17.Remove the reservoir with a rubber belted strap
wrench.
18.Before putting the body into the clamp blocks,
partially insert an old or used bearing assembly in the
body ( This will prevent over tightening and deforming
the body).
STEERING / SUSPENSION
To Next Page
Loading...
Need help?
General
