Polaris 2015 RZR 900 Service Manual

8.42
9925723 R01 - 2015 RZR 900 Service Manual
© Copyright 2014 Polaris Industries Inc.
41.Install LSC knob and torque screw to specification.
42.Install reservoir O-ring.
43.Apply thin layer of shock oil to O-ring.
44.Thread down reservoir with strap wrench and torque
to specification.
45.Ensure LSC or DSC high and low speed adjusters
are fully open before filling reservoir with oil.
46.Install IFP bearing and O-ring on the IFP and apply a
thin layer of shock oil to bearing and O-ring.
47.Install IFP assembly without bleed screw using the
IFP installation tool.
NOTE: Push IFP into reservoir about 1.500″ with
hand on top of tool. If you do not place hand on
top of tool, you will be wearing oil.
48.Ensure oil is 0.250″ above IFP and install bleed screw
with O-ring.
STEERING / SUSPENSION

Polaris 2015 RZR 900 Specifications

General

Brand	Polaris
Model	2015 RZR 900
Category	Utility Vehicle
Language	English