Polaris RZR XP Turbo User Manual

4.18
9928491 R04 - 2017-2018 RZR XP Turbo / XP4 Turbo Service Manual
© Copyright Polaris Industries Inc.
10.Remove the two bolts
u
and two T40 Torx screws
o
retaining the front of the seat base frame and two rear
bolts
i
. Remove the seat base assembly from the
vehicle.
11. Remove the T-40 Torx screw
a
retaining the fuel tank
strap to the seat base frame. The strap does not need
to be removed from the vehicle.
12.Remove the Torx screws
s
and plastic rivets
d
retaining the block-off panel using a T40 Torx driver.
13.Remove the Torx screws
g
retaining the fuse box.
14.Remove the cover panel and remove the fuel tank
vent line from the tank fitting.
NOTE
Carefully bend back the cover panel by the fuel fill neck.
Do not bend the plastic so far as to crack the panel or
permanently deform the plastic.
15.Cut the three zip ties retaining the wiring to the edges
of the fuel tank.
EFI / FUEL SYSTEM

Polaris RZR XP Turbo Specifications

General

Brand	Polaris
Model	RZR XP Turbo
Category	Offroad Vehicle
Language	English