To Next Page

To Previous Page

6.4

9928491 R04 - 2017-2018 RZR XP Turbo / XP4 Turbo Service Manual

4. Adjust the shift cable so there is the about the same

amount of cable travel when shifting slightly past

HIGH gear than when shifting to PARK.

5. Thread the upper or lower jam nut as required to

obtain proper cable adjustment.

NOTE

This procedure may require a few attempts to obtain

the proper adjustment.

6. Once the proper adjustment is obtained, place the

shift cable and upper jam nut into the mount. Tighten

the lower jam nut against the mount.

TORQUE

Shift Cable Jam Nuts:

16 ft-lb (22 Nm)

7. Start engine and shift through all gears to ensure the

shift cable is properly adjusted. If transmission still

ratchets after cable adjustment, the transmission will

require service.

TRANSMISSION

Polaris RZR XP Turbo User Manual

Questions and Answers: