Quantum Scalar i6000 - Using Q-EKM

Chapter 8: Encryption Key Management
Setting up EKM on the Scalar i6000
Quantum Scalar i6000 User’s Guide 297
3 Install certificates if needed, following the instructions in the
following table for your encryption system.
Installing SKM Library TLS Certificates from Quantum CD
Note: The Quantum certificate bundle can be used only with SKM.
Quantum TLS certificates for use with SKM may already be pre-
loaded on your library. Check if these exist before adding new
TLS certificates for SKM. Refer to
Checking for Current
Certificates on page 296.
1 Insert the CD into the CD ROM drive of your computer.
2 Either copy the file to a known location on your computer or use the
CD as the location from which you will retrieve the file.
3 From the Tools menu, select EKM Management > Import
Communication Certificates. The Communication Certificate
Import dialog box appears.
Encryption
System
Action
Q-EKM or TKLM/
SKLM
If you wish to install your own Root certificate to
supersede the existing self-generated certificate
on the library, follow the instructions in
Installing
User-Provided Certificates on page 299.
SKM For SKM, you can either:
• Install from the Quantum certificate bundle on
CD. Refer to
Installing SKM Library TLS
Certificates from Quantum CD on page 297.
• Install your own certificates. Refer to Installing
User-Provided Certificates on page 299.
KMIP-compliant
key
management
You must use certificates provided by the KMIP
server administrator. Refer to
Installing User-
Provided Certificates on page 299.