Chapter 15: Maintaining Your Library
Monitoring the Library
534 Quantum Scalar i6000 User’s Guide
2 From the Media Status dialog box, you can perform the following
tasks:
• Change the sorting of media in the status list (for example, by
location or media type) by clicking the column heading by
which you want the media sorted. Repeatedly clicking a column
heading toggles between ascending and descending order.
• Use filtering criteria to select the media that you want to appear
in the status list on the dialog box (see
Filtering Media From the
Status List on page 534).
• Mail, save, or print status information by using the Send button
(see
Mailing, Saving, and Printing Status Information on
page 548).
Filtering Media From the Status List
You can specify the media that you want to appear in the status list by
selecting media ID and media type criteria from the Filter area of the
Media Status dialog box.
1 Use one or both of the following elements to specify the media that
you want to appear in the status list:
• To specify a media item by media ID, type the exact barcode that
is associated with a particular cartridge in the Media ID text
box. You also can use the asterisk (*) as a wild card character to
represent one or more characters in the media ID. This will list
all media for IDs that match the designated pattern. For
# Mounts The number of mounts within the history of the library.
Encryption Reports whether the media is encrypted. The values are Encrypted, Not
Encrypted or Unknown.
Partition Name The name of the partition to which the cartridge is assigned.
Note: When viewed from a Active Vault partition, this column is named
Source Partition and reports the partition from which the media came.
Source Partition This column appears when the library view is set to an Active Vault partition. It
reports the partition from which the media came.
Element Description
To Next Page
Loading...
