Quantum Scalar i6000 User Manual

Chapter 15: Maintaining Your Library
Maintenance Actions
562 Quantum Scalar i6000 User’s Guide
The Details button displays the Drive Details dialog box. For more
information, see
Viewing Drive Details on page 562.
4 In the Drive(s) area, click the appropriate drive row to highlight it.
5 Perform operations in either the Fibre Channel Parameters area or
the Control area of the Drives dialog box.
Viewing Drive Details
1 On the Drives dialog box in the Drive(s) area, click the appropriate
drive row to highlight it.
2 Click Details. The Drive Details dialog box appears.
Replace/Vary Off
or Activate/Vary
On
Powers off or on the specified tape drive within the drive sled. The label of the
button toggles between Replace/Vary Off and Activate/Vary On. Each use of
this button updates the drive information in the Drive(s) area. Use this button
when you replace drives.
Remove IT Nexus Allows the library to clear drive reservations and media removal preventions.
View Logs View any saved drive logs.
Element Description

Quantum Scalar i6000 Specifications

General

Form Factor	Rack-mountable
Interface	Fibre Channel, SAS
Product Type	Tape Library
Cooling	Redundant cooling fans
Dimensions	Varies by configuration
Weight	Varies by configuration
Operating Humidity	20% to 80% non-condensing
Scalability	Scalable
Drive Types	LTO
Redundancy	Redundant power supplies
Management	Web-based management
Tape Technology	LTO
Supported Media	LTO Ultrium 9, LTO Ultrium 8, LTO Ultrium 7, LTO Ultrium 6
Power Supply	Redundant power supplies
Non-operating Humidity	5% to 95% non-condensing