Quantum Scalar i6000 User Manual

Chapter 15: Maintaining Your Library
Maintenance Actions
642 Quantum Scalar i6000 User’s Guide
• If there are multiple failed results, run the library alignment test
(part of the installation verification or partial frame test) to make
sure the library is level.
• If the library is level and there are multiple failed results, the scanner
should be inspected and replaced if necessary.
See Figure 75 on page 642.
Figure 75 Scan Fiducials
Graphical Report

Quantum Scalar i6000 Specifications

General

Form Factor	Rack-mountable
Interface	Fibre Channel, SAS
Product Type	Tape Library
Cooling	Redundant cooling fans
Dimensions	Varies by configuration
Weight	Varies by configuration
Operating Humidity	20% to 80% non-condensing
Scalability	Scalable
Drive Types	LTO
Redundancy	Redundant power supplies
Management	Web-based management
Tape Technology	LTO
Supported Media	LTO Ultrium 9, LTO Ultrium 8, LTO Ultrium 7, LTO Ultrium 6
Power Supply	Redundant power supplies
Non-operating Humidity	5% to 95% non-condensing