RFL Electronics IMUX 2000 - Page 333

Because RFL™ and Hubbell® have a policy of continuous product improvement, we reserve the right to change designs and specifications without notice.
RFL DA-291B RFL Electronics Inc.
April 13, 2010 13 (973)
334-3100
Table 7. Timeslot Settings
T1
Timeslot
E1
Timeslot
SW2-4
(16)
SW2-5
(8)
SW2-6
(4)
SW2-7
(2)
SW2-8
(1)
Max # of
T1
Timeslots
Max # of
E1
Timeslots
N/A N/A
OFF OFF OFF OFF OFF
N/A N/A
1 1
OFF OFF OFF OFF ON
24 31(30)**
2 2
OFF OFF OFF ON OFF
23 30(29) **
3 3
OFF OFF OFF ON ON
22 29 (28)**
4 4
OFF OFF ON OFF OFF
21 28 (27)**
5 5
OFF OFF ON OFF ON
20 27(26)**
6 6
OFF OFF ON ON OFF
19 26 (25)**
7 7
OFF OFF ON ON ON
18 25 (24)**
8 8
OFF ON OFF OFF OFF
17 24 (23)**
9 9
OFF ON OFF OFF ON
16 23 (22)**
10 10
OFF ON OFF ON OFF
15 22 (21)**
11 11
OFF ON OFF ON ON
14 21 (20)**
12 12
OFF ON ON OFF OFF
13 20 (19)**
13 13
OFF ON ON OFF ON
12 19 (18)**
14 14
OFF ON ON ON OFF
11 18 (17)**
15 15
OFF ON ON ON ON
10 17 (16)**
16 16 *
ON OFF OFF OFF OFF
9 16 (N/A)*
17 17
ON OFF OFF OFF ON
8 15
18 18
ON OFF OFF ON OFF
7 14
19 19
ON OFF OFF ON ON
6 13
20 20
ON OFF ON OFF OFF
5 12
21 21
ON OFF ON OFF ON
4 11
22 22
ON OFF ON ON OFF
3 10
23 23
ON OFF ON ON ON
2 9
24 24
ON ON OFF OFF OFF
1 8
N/A 25
ON ON OFF OFF ON
N/A 7
N/A 26
ON ON OFF ON OFF
N/A
6
N/A 27
ON ON OFF ON ON
N/A
5
N/A 28
ON ON ON OFF OFF
N/A
4
N/A 29
ON ON ON OFF ON
N/A
3
N/A 30
ON ON ON ON OFF
N/A
2
N/A 31
ON ON ON ON ON
N/A
1
* Do not use timeslot 16 in an E1 system which uses CAS (channel associated signaling).
** The maximum timeslots available is reduced by “1” for an E1 system
using CAS when the starting timeslot is
between timeslot 1 and 15.