Because RFL™ and Hubbell® have a policy of continuous product improvement, we reserve the right to change designs and specifications without notice.
SHORT HAUL FIBER INTERFACE (MA-600)
The MA-600 is a Short Haul Fiber Interface Module that can be used with the RFL DS562I
Synchronous Data Module. The Short Haul Fiber Interface Module is a single width module, and
consists of an input section (detector) and an output section (emitter). The module is mounted at the
rear of an RFL IMUX 2000 chassis, directly opposite the DS562I module. The input power
requirement is +5 Volts at 175 mA maximum from the chassis supply. The input drive signals are TTL
logic-level, generated by the DS562I.
Table 11. Short Haul Fiber Interface Module, Characteristics
Assembly
Number
Type Wavelength/
Mode
Connector
Type
Receiver
Sensitivity
Tx Level Typical
Distance
9547-600 LED
Emitter/
Detector
850 nm/
multimode
ST -11.5dBm to -26dBm -14dBm to -21dBm
Average into 50um
fiber
-11dBm to -18dBm
Average into 62.5um
fiber
Up to 1km
(0.6 mi.)
1
2
3
4
Figure 8. Controls and indicators, MA-600 Module Adapter
RFL DS-562I RFL E
lectronics Inc.
June 14, 2007 20 (973) 334-3100
To Next Page
Loading...