Because RFL™ and Hubbell® have a policy of continuous product improvement, we reserve the right to change designs and specifications without notice.
RFL DS-TT RFL Electro
nics Inc.
January
31, 2008 7 (973) 334-3100
Vendor
Description Part Number
Molex Series 2695/6471 Crimp Terminal Housing 22-01-2037
Molex Series 2759 Crimp Terminal 08-50-0114
1
2
3
3
2
5
Rx
Tx
GND
RFL DS-TT
Transfer Trip Module End
PC or
LAPTOP End
Plugs into J1 of Transfer Trip Module
Figure 2. Cable connections between the RFL DS-TT transfer trip module (RS-232 connector, J1) and a PC
or LAPTOP. (This cable is required for local mode operati
on only. See page 26).
Figure 2. Cable connections between the RFL DS-TT transfer trip module (RS-232 connector, J1) and a PC
or LAPTOP. (This cable is required for local mode operation only. See page 26).
Locking
Tab
3
2
1
Locking ramp
1
2
3
3-pin Molex (or equivalent) connector housing
with female pins (See note below)
9-pin D-subminiature
connector (DB-9 Female)
Molex Incorporated
Lisle, Illinois
60532
Note: Any equivalent connector can be used having 0.025 in. square pins on 0.100 in. centers
Top view of J1 connector on
transfer trip module
showing male pins
To Next Page
Loading...