Because RFL™ and Hubbell® have a policy of continuous product improvement, we reserve the right to change designs and specifications without notice.
RFL MA-490 Telnet I/O RFL Electronics Inc.
March 6, 2007 22 (973)
334-3100
To re-program any of the values shown on the parameter settings display, type in the number in the "#"
column, and then press [ENTER]. The parameter will be displayed, with information about its setting
below it. Type in the new setting, and then press [ENTER].
Example 1: Editing the IP Address parameter setting.
1. Enter the number for the IP Address parameter (53) on your PC or laptop keyboard, and then
press the [ENTER] key.
The IP Address parameter will be displayed, with information about its setting
below it.
053 IP Address 195.195.085.254
[ddd.ddd.ddd.ddd]>
2. Type in the desired IP Address, (for example: 195.195.085.253) and then press the [ENTER]
key.
The IP Address parameter will be re-displayed, set to the new value.
053 IP Address 195.195.085.253
3. Enter the "SV" command to save your new system label:
MA-490-P>SV
To Next Page
Loading...