400 Rockwell Automation Publication 193-UM015D-EN-P - February 2015
Chapter 9 EtherNet/IP Communications
1. Create a new or open an existing RSLogix 5000 or Studio 5000 project
and verify that the Logix controller is offline.
For ControlLogix users who want to manually add an E300 Electronic Overload
Relay online, go online with the ControlLogix controller using RSLogix 5000 or
Studio 5000 software. The ControlLogix controller can be in Run or Program
mode.
2. Right click on the Ethernet tree of the EtherNet/IP scanner and select New
Module.
To Next Page
Loading...
