Siemens SINAMICS G120 - Guide through this Manual

Introduction
2.2 Guide through this manual
Inverter with CU230P-2 Control Units
24 Operating Instructions, 11/2013, FW V4.6.6, A5E02430659B AG
2.2
Guide through this manual
In this manual, you will find background information on your inverter, as well as a full
description of the commissioning procedure:
①
Here you will find information about the
hardware of your inverter and
the
commissioning tools:
•
Identifying the converter (Page 25)
②
•
Overview of the inverter installation
(Page 41)
All information relating to the commissioning of
your inverter is located
in the following
chapters:
③
•
Basic commissioning (Page 80)
•
Adapting the terminal strip (Page 93)
•
Configuring the fieldbus (Page 107)
•
Setting functions (Page 225)
④
•
Backing up data and series commissioning
(Page 323)
⑤
Information regarding the maintenance and
diagnostics of your inverter
is located in the
following chapters:
•
Corrective maintenance (Page 343)
•
Alarms, faults and system messages
(Page 355)
⑥
The most important technical data for your
inverter is located in this chapter:
•
Technical data (Page 373)
⑦
The
appendix contains some background
information and explanatory examples:
•
Appendix (Page 411)