Siemens SINAMICS G120 - Power Module; Power Modules in Degree of Protection IP20 and with Push-Through System

Description
3.3 Power Modules
Inverter with CU230P-2 Control Units
28 Operating Instructions, 11/2013, FW V4.6.6, A5E02430659B AG
3.3
Power Modules
Which Power Module can I use with the Control Unit?
You can operate the CU230P-2 Control Unit with the following Power Modules:
● PM230
● PM330
● PM240
● PM240-2
● PM250
● PM260
3.3.1
Power Modules in degree of protection IP20 and with push-through system
3.3.1.1
Power Modules
Figure 3-1 Power Modules with degree of protection IP20 examples
Figure 3-2 Power Modules with the push-through system FSA … FSC