Siemens SINAMICS G120 - DV;Dt Filter; Braking Module and Braking Resistor

Description
3.4 System components for the Power Modules
Inverter with CU230P-2 Control Units
Operating Instructions, 11/2013, FW V4.6.6, A5E02430659B AG
37
Sine-wave filter for PM250 Power Module
Power Modul 6SL3225-…
Power
Sine-wave filter
FSC
…0BE25-5A0
7.5 kW
6SL3202-0AE22-0SA0
…0BE27-5 A0, …0BE31-1A0
11.0 kW … 15.0 kW
6SL3202-0AE23-3SA0
FSD
…0BE31-5A0, …0BE31-8A0
18.5 kW … 22 kW
6SL3202-0AE24-6SA0
…0BE32-2A0
30 kW
6SL3202-0AE26-2SA0
FSE
…0BE33-0A0, …0BE33-7A0
37 kW … 45 kW
6SL3202-0AE28-8SA0
FSF
…0BE34-5A0, …0BE35-5A0
55 kW … 75 kW
6SL3202-0AE31-5SA0
…0BE37-5A0
90 kW
6SL3202-0AE31-8SA0
3.4.5
dv/dt filter
dv/dt filter for PM330 Power Module
When you use a dv/dt filter, the permitted cable length between the filter and the motor
increases to 100 m for a shielded cable or 150 m for an unshielded cable. For further details,
refer to the description of the dv/dt filter.
Power Module 6SL3310-…
Power
Standard sine-wave filter
Compact sine-wave filter
GX …1PE33-0AA0
…1PE33-7AA0
160 kW
200 kW
6SL3000-2DE35-0AA0
6SL3000-2DE35-0AA0
6SL3000-2DE35-0EA0
6SL3000-2DE35-0EA0
3.4.6
Braking Module and braking resistor
The braking resistor allows loads with a high moment of inertia to be quickly
braked.
Inverters with power up to 132 kW have an integrated Braking Module that controls
the braking resistor.
A Braking Module is available as option for inverters
with more power.
An example for a braking resistor is shown at the side.