Setting functions
8.7 Application-specific functions
Inverter with CU230P-2 Control Units
Operating Instructions, 11/2013, FW V4.6.6, A5E02430659B AG
315
Activate energy-saving mode with external setpoint setting
In this operating mode, the setpoint is specified by an external source (e.g. a temperature
sensor); the technology setpoint can be used here as a supplementary setpoint.
Figure 8-37 Energy-saving mode using an external setpoint with boost
Figure 8-38 Energy-saving mode using an external setpoint without boost
To Next Page
Loading...
