Installing
4.4 Installing Control Unit
Inverter with CU230P-2 Control Units
64 Operating Instructions, 11/2013, FW V4.6.6, A5E02430659B AG
Macro 12: Two-wire control with
method 1
Factory setting for inverters with
CU230P-2 HVAC and
CU230P-2 CAN Control Units
Macro 14: Switch over between fieldbus and motorized potentiometer (MOP) via DI 3
PROFIdrive telegram 1
Macro 15: Switch over between analog setpoint and motorized potentiometer
(MOP) via DI 3
Macro 17: Two-wire control with
method 2
Macro 18: Two-wire control with
method 3
To Next Page
Loading...
