Siemens SINUMERIK 840D Commissioning Manual

08/2005 Starting Up HMI Embedded (IM2)
4 Functions/Parameterization
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
IM2/4-85
9322 V24_PG_PC_EOF
H05
CR: C4
- PG: End of transmission character REAL 3/4
OP30, Emb OP30: 26, Emb:
26
0 0xFF
IMMEDIATE
LY
-
9323 V24_PG_PC_CONTROLS
H05
CR: C4
- PG: Special bits
9324 PG: Line-controlled
REAL 3/4
OP30, Emb OP30: 144, Emb:
144
0 0x3FF
IMMEDIATE
LY
-
9324 V24_PG_PC_RTS
H05
CR: C4
- BYTE 3/4
OP30, Emb OP30: 0, Emb: 0
0 1
IMMEDIATE
LY
-
9325 V24_PG_PC_BAUD
H05
CR: C4
- PG: Baud rate
(300, 600, 1200, 2400, 4800, 9600)
0 1 ...
BYTE 3/4
OP30, Emb OP30: 5, Emb: 5
0 8
IMMEDIATE
LY
-
9326 V24_PG_PC_DATABITS
H05
CR: C4
- PG: Data bits BYTE 3/4
OP30, Emb OP30: 1, Emb: 1
0 1
IMMEDIATE
LY
-
9327 V24_PG_PC_PARITY
H05
CR: C4
- PG: Parity bits BYTE 3/4
OP30, Emb OP30: 0, Emb: 0
0 2
IMMEDIATE
LY
-
9328 V24_PG_PC_STOPBIT
H05
CR: C4
- PG: Stop bits BYTE 3/4
OP30, Emb OP30: 0, Emb: 0
0 1
IMMEDIATE
LY
-
9329 V24_PG_PC_LINE
H05
CR: C4
- PG: RS-232-C interface (COM1/COM2)
(COM1/COM2)
BYTE 3/4
Emb Emb: 1
1 2
IMMEDIATE
LY
-
9400 TOOL_REF_GEO_AXIS1
H05
CR: BO
- Absolute dimension tool length compensation
GEOaxis.1
DOUBLE 3/4
OP30, Emb OP30: 0, Emb: 0
*** ***
IMMEDIATE
LY
-
9401 TOOL_REF_GEO_AXIS2
H05
CR: BO
- Absolute dimension tool length compensation
GEOaxis.2
DOUBLE 3/4
OP30, Emb OP30: 0, Emb: 0
*** ***
IMMEDIATE
LY
-
9402 TOOL_REF_GEO_AXIS3
H05
CR: BO
- Absolute dimension tool length compensation
GEOaxis.3
DOUBLE 3/4
OP30, Emb OP30: 0, Emb: 0
*** ***
IMMEDIATE
LY
-

Siemens SINUMERIK 840D Specifications

General

Series	SINUMERIK 840D
Axes	Up to 31
Channels	Up to 10
Operating System	Windows-based
Power Supply	24 V DC
Control Unit Type	CNC
Interface	Ethernet, PROFIBUS
Display	TFT color display
Interpolation	Spline
PLC	Integrated PLC
Data Storage	CompactFlash, USB